This is the 1/10 scale electric powered, radio controlled,
ready to run, DuraTrax Evader EXB Off-Road Buggy W/Sprint ESC.



Chassis: MagnaFlex injection molded composite flexible tub style covered by the Duratrax 1-year Stress-Tech guarantee Drive: Rear wheel drive with hardened steel driveshaft and axles

Motor: Photon Speed 2 with adjustable motor mount and motor guard for protection from rocks and other vehicles

Radio: 2-channel 27MHz AM pistol grip Tactic with trims, trims, battery LED, TRX200 BEC receiver, TSX200 transmitter does not have charge jack

Speed Control: Duratrax Sprint 2 w/reverse

Bushings: Complete set Shocks: Rapid-Tune Oil-filled composite bodied

Gearbox: Closed Differential: Planetary steel gear

Slipper Clutch: Adjustable to control wheel spin and protect gears

Transmission: Single-speed

Tires: 2.2" (56mm) inner diameter, 0.98" (25mm) wide ribbed front and 2.2 (56mm) inner diameter, 1.6" (42mm) wide spiked rear

Wheels: 2.2" (56mm) diameter one piece white dish type

Body: Painted and trimmed, clear windows, race legal

Suspension: Adjustable, with multiple mounting positions for shocks and arms

Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

Servo Saver: Included One-year Stress-Tech free replacement guarantee (see COMMENTS) Warranty Period: 90 days



Evader EXB rolling chassis with oil-filled shocks, Photon 2 motor, Sprint 2 ESC. prepainted body, 2.2 ribbed front, spike rear tires, 2.2 one piece wheels, 23 tooth pinion gear, 81 tooth spur gear, 2-channel 27MHz Tactic AM Pistol grip radio with pre-mounted electronics and photo-illustrated instructions



Battery: 6- or 7-cell stick pack with standard connector Charger: AC/DC Timed or Peak for 6-cell battery (Duratrax makes a NiMH Battery and Charger Combo, DTXP4610) Misc. Items: Building and track equipment



Length: 15.5" (394mm)

Width: 9.875" (251mm)

Height: 6.75" (170mm)

Weight: 2.75lb (1.26kg)

Wheelbase: 11.2" (284mm)

Front Tread: 8.6" (219mm)

Rear Tread: 8.7" (222mm) side-to-side at wheel centers

Front Track: 9.5" (241mm)

Rear Track: 9.6" (243mm) side to side at outer edges of wheels

Ground Clearance: 1.8" (47mm)

BODY- Length: 11.4" (290mm)

Width: 5.9" (151mm) 3.8" (97mm) behind from wheels (thinnest point)

Height: 2.2" (87mm)


COMMENTS: To upgrade all bushings to ball bearings, order the Complete Bearing Set, DTXC1096 To upgrade individual bushings to bearings, order Qty. Size Location Qty. Bearing Set 4 3/16X3/8 Fr Hubs 1 DTXC1423 4 5x10mm Rear Hubs 1 DTXC1535 2 5x10mm Top Shaft 1 DTXC1535 2 5x11mm Idler Gear 1 DTXC1535 2 10x15mm Differential 1 DTXC1595


Stress-Tech Free Replacement Parts Guarantee- "DuraTrax is so confident in the quality and durability of Stress-Tech plastic parts that they will replace any Stress-Tech part that breaks during the first 12 months you own your Evader EXB. Just send the broken part to DuraTrax and they will send you a FREE replacement. See the instruction manual for mailing address and details." Note: This warranty is ONLY available directly from DuraTrax. It is not available from place of purchase.

The Duratrax Evader EXB is available with the following radio channels and body colors;

A1 Green DTXD30A1

A4 Yellow DTXD30A4

A2 Blue DTXD30A2

A5 Orange DTXD30A5

A3 Red DTXD30A3

A6 Purple DTXD30A6

« Go Back

Powered By PieCMS