Super Airliner DF ARF

Two ducted fan units are included and ready to accept the recommended motors (EFLM1320DF). The fully molded and painted airframe requires little time to assemble, making this Super Airliner ready for takeoff in a short amount of time. Additionally, all flight control surfaces are pre-hinged, reducing assembly time and ensuring smooth response right away. The included shock absorbing landing gear ensures that takeoffs and landings are smooth and stable.


Wingspan: 55 in (1400mm)
Overall Length: 57 in (1450mm)
Wing Area: 505 sq in (3245 sq cm)
Flying Weight: 3.25 lb (1.5 kg)
Motor Size: BL 400 DF Outrunner 3500Kv (EFLM1320DF) (2 required)
Radio: JR Sport S400 or SX600
Servos: four (4) E-flite S75 sub-micro servos (EFLRS75) and one JR SPORT ST47BB servo (JSP20060)
Trim Scheme Colors: Prepainted
CG (center of gravity): 5.5 in (140mm) back from the leading edge
Prop Size: 66mm 3-bladed fan unit (2)(included)
Speed Control : 20-amp Brushless (EFLA311B) (2 required)
Recommended Battery: 2100 3-cell Li-Po (THP21003SPL) (2 required)
Flaps: n/a
Retracts: n/a
Approx. Flying Duration: 9–10 minutes

Needed to Complete

In order to fly, you will need:

Two E-flite 400DF motors (EFLM1320DF or EFLM1320DF2 for a 2-pack)
Two 3-cell 11.1V 2100mAh Li-Po battery packs (THP21003SPL)
4-channel FM radio system (JSP14000**)
Two 20A brushless ESCs (EFLA311B)
Four sub-micro servos (2 aileron, 1 rudder & 1 steering) (EFLRS75)
One standard servo (elevator) (JSP20060)
Three Y-harnesses (aileron, throttle and rudder/steering servos) (JSP98020)
Two 6-inch extension leads (may be needed for ESC's) (JSP98110)
Three 12-inch extension leads (aileron & steering servos) (JSP98030)

« Go Back

Powered By PieCMS