HPI HELLFIRE READY TO RUN

HPI Racing has added a completely new 1/8th scale truck to its market leading monster truck line up.

The new Hellfire is designed from scratch with only one goal: maximum performance in all conditions! No compromise – the Hellfire is not a converted buggy or tuned up monster truck. It is purpose built to be faster and give better handling than any other competitive truck.
A high level of attention to detail is paid in every area. HPI designers strove to increase performance, to reduce maintenance and to simplify chassis adjustments. The result is a new definition for "performance truck".

Optimum Agility and Handling

Hellfire features all-new suspension and steering geometries especially designed for best performance with big truck wheels and on rough terrain.
A very low centre of gravity gives increased responsiveness and better chassis balance.

Hellfire offers a wide range of tuning adjustments. You can fine tune the truck to every condition or personal driving style. All important suspension parameters are easily adjustable. No option parts are necessary to adjust the suspension settings and several configurations are possible with the included parts. Eccentric bushings are used for a convenient adjustment of toe in, kick up, anti dive and anti squat.

Full List of Adjustments:
  • Front inboard toe angle adjustments: 0 degrees to -2 degrees.
  • Rear inboard toe angle adjustments: 2 degrees to 4 degrees.
  • Adjustable front and rear camber using strong steel turnbuckles.
  • The camber can be fine tuned to suit your track conditions.
  • Adjustable steering geometry.
  • Spring clips are included to fine tune your ride height.
  • Anti-dive adjustments: 0 degrees to 2 degrees in 0.5 degree increments.
  • Anti-squat adjustments: 1.5 degrees to 3.5 degrees in 0.5 degree increments.
  • Front kick-up angle: adjustable from 21 to 25 degrees.
  • 24 possible shock positions available to fine tune your suspension.
  • Four different shock pistons are included for a wide range of tuning options.
  • Different compression and rebound can be achieved with tapered shock pistons.
  • Damping can be fine tuned with different diameter holes.
  • Adjustable brake bias to control entry steering and jumping.
  • Adjustable front and rear inboard toe with convenient urethane eccentric bushings.

http://52.cmsintelligence.com/files/HELL.JPG

Hellfire Specifications:

Wheelbase = 348mm*
Total Length = 513mm
Total Width = 415mm
Total Height = 173mm
Weight = 9.2 lb (ready to run, less fuel)

« Go Back

Powered By PieCMS