Take the easy assembly and extreme 3D performance of ElectriFly FlatOuts. Add the showstopping looks of the full-scale Extra 300S flown by Patty Wagstaff, the first woman to become a U.S. National Aerobatic Champion. The result — an instant, spectacular air show, wherever you fly!
- Flight-ready in only 2-3 hours.
- Custom hardware provides unmatched strength and performance!
- Includes T-370 brushed motor with gearbox and slow fly prop for exciting 3D performance.
Fly in just 2-3 hours! Using foam-safe CA and the supplied custom hardware, you'll easily assemble the Turmoil's pre-printed foam panels and carbon rods into a sturdy, great-looking 3D model.
A powerful T-370 brushed motor and gearbox are included and ready for installation. Also supplied are a slow fly propeller and prop saver that enables it to deflect at landing.
"For just a little time and money, the Extra 300S offers big returns — outdoing other foam profile models in looks, construction quality, and 3D aerobatic ability."
Don Anderson
President and Founder
Great Planes Model Manufacturing
Control Horns
The control horns have a larger than normal hole that fits the Z-bend pushrod connector without slop. The control does double duty as a hinge, reducing weight and assuring correct linkage geometry.
Landing Gear
Molded strut supports hold the 2 mm carbon rod landing gear legs in position. They're also braced at the fuselage, wing and wheels for a strong, properly reinforced landing gear.
Amazing Control Throw
Large servo arms and control horns offer up to 80 degree deflection.
Clip-Hinge System
Clip-Hinges allow control surfaces to pop off in a crash and avoid damage.
Z-Bends
A large bearing surface on the Z-bends reduces wear to prevent slop, unlike linkage systems that rely on small wire Z-bends. To make installation simple, the 1 mm carbon rod is secured in the Z-bend with a drop of CA.
Tailwheel
The tail gear pivots on the carbon fin post, allowing the snap-in tailwheel to steer the airplane while on the ground.
SPECIFICATIONS
Stock Number: GPMA1114
Wingspan: 35.5 in (900 mm)
Wing Area: 223 in² (14.4 dm²)
Weight: 7.5-9.0 oz (215-255 g)
Wing Loading: 4.8-5.8 oz/ft² (15-18 g/dm²)
Length: 29.5 in (750 mm)
Includes: T-370 motor, 5:1 gearbox, prop
Requires: 4-channel radio w/3 micro servos (10 grams or less), 10-amp ESC, 3S 640mAh LiPo battery pack, charger