- Ready for first performances in as little as 4-6 hours.
- Sized right for compact cars, nearby parks and your favorite airfield.
- Built from light, laser-cut woods.
The Edge 540's cowl installs easily with powerful rare-earth magnets. That leaves its bold, clean lines unmarked and intact!
Big packs are no problem -- there's plenty of room. No tools are required; magnets make hatch removal and replacement easy -- and pack changes that much faster!
External servo mounts simplify installation, ease adjustments and shorten linkages, for faster, stronger response on demand.
The Edge 540 is already compact, but a 2-piece wing design makes it even easier to take along. Each wing panel slides onto a carbon fiber joiner tube -- and attaches with a single hex-head screw!
The trim scheme is distinctive, original and done in professionally applied MonoKote® film. The fiberglass cowl, ABS wheel pants and aluminum gear are already painted to match and ready to install.
Max power and throws, and the Edge 540 can master the 3D maneuvers you know today and whatever you learn tomorrow. Dial both back, and it can be an air show aerobat or a pleasant, undemanding sport flyer.
A strong, built-up mount is already in place. Reliance on outrunner brushless power means that a gear drive is unnecessary -- fact that makes the Edge 540 lighter and less expensive to equip.
After-maneuver orientation is easy, even at a distance. A checkerboard pattern on the wing’s underside helps you tell upside-down from right-side up in a flash.
SPECIFICATIONS
Wingspan: 41 in (1040 mm)
Wing Area: 353 in² (22.9 dm²)
Weight: 29-32 oz (820-910 g)
Wing Loading: 11.8-13.1 oz/ft² (36-40 g/dm²)
Fuselage Length:39.5 in (1005 mm)
Requires: 4-channel radio w/4 micro servos, outrunner brushless motor, 35A brushless ESC (min) and 11.1V 1500mAh LiPo battery.