Extra 300S Flatouts ARF

 

Take the easy assembly and extreme 3D performance of ElectriFly FlatOuts. Add the showstopping looks of the full-scale Extra 300S flown by Patty Wagstaff, the first woman to become a U.S. National Aerobatic Champion. The result — an instant, spectacular air show, wherever you fly!

  • Flight-ready in only 2-3 hours.
  • Custom hardware provides unmatched strength and performance!
  • Includes T-370 brushed motor with gearbox and slow fly prop for exciting 3D performance.

Parts Layout
Fly in just 2-3 hours! Using foam-safe CA and the supplied custom hardware, you'll easily assemble the Turmoil's pre-printed foam panels and carbon rods into a sturdy, great-looking 3D model.



Motor, Gearbox & Prop
A powerful T-370 brushed motor and gearbox are included and ready for installation. Also supplied are a slow fly propeller and prop saver that enables it to deflect at landing.



Don Anderson
"For just a little time and money, the Extra 300S offers big returns — outdoing other foam profile models in looks, construction quality, and 3D aerobatic ability."
Don Anderson
Don Anderson
President and Founder
Great Planes Model Manufacturing


Control Horns
Control Horns
The control horns have a larger than normal hole that fits the Z-bend pushrod connector without slop. The control does double duty as a hinge, reducing weight and assuring correct linkage geometry.



Landing Gear
Landing Gear
Molded strut supports hold the 2 mm carbon rod landing gear legs in position. They're also braced at the fuselage, wing and wheels for a strong, properly reinforced landing gear. 



Amazing Control Throw
Amazing Control Throw
Large servo arms and control horns offer up to 80 degree deflection.



Clip-Hinge System
Clip-Hinge System
Clip-Hinges allow control surfaces to pop off in a crash and avoid damage.



Z-Bends
Z-Bends
A large bearing surface on the Z-bends reduces wear to prevent slop, unlike linkage systems that rely on small wire Z-bends. To make installation simple, the 1 mm carbon rod is secured in the Z-bend with a drop of CA.




Tailwheel
Tailwheel
The tail gear pivots on the carbon fin post, allowing the snap-in tailwheel to steer the airplane while on the ground.





SPECIFICATIONS
Stock Number: GPMA1114
Wingspan: 35.5 in (900 mm)
Wing Area: 223 in² (14.4 dm²)
Weight: 7.5-9.0 oz (215-255 g)
Wing Loading: 4.8-5.8 oz/ft² (15-18 g/dm²)
Length: 29.5 in (750 mm)
Includes: T-370 motor, 5:1 gearbox, prop
Requires: 4-channel radio w/3 micro servos (10 grams or less), 10-amp ESC, 3S 640mAh LiPo battery pack, charger


« Go Back

Powered By PieCMS