Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.
Specifications
| Wingspan: | 38.75 in (985mm) |
| Overall Length: | 34 in (865mm) |
| Wing Area: | 325 sq in (21 sq dm) |
| Flying Weight: | 22 - 25 oz (625 - 710g) |
| Motor Size: | Park 400 Inrunner or Park 450 Outrunner |
| Radio: | 4-channel or greater (7-channel for quad flaps) |
| Servos: | 4 sub-micros (6 sub-micros for quad flaps) |
| Trim Scheme Colors: | UltraCote Fluourescent Blue, Flame Red, Transparent Red & White |
| CG (center of gravity): | 2.25 in (57mm) behind the leading edge |
| Prop Size: | 10x7 - 11x7 |
| Hardware Included: | Yes |
| Speed Control : | 20A Brushless |
| Recommended Battery: | 2100 mAh 3-Cell 11.1V Li-Po |
| Flaps: | Yes (optional) |
| Control Throw (Ailerons): | 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate |
| Control Throw (Elevator): | 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate |
| Control Throw (Rudder): | 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate |
| Approx. Flying Duration: | 10-20 minutes |
| Scale: | Park Flyer |
| Approx. Assembly Time: | 1-2 hours |
| Gear Ratio: | 6.5:1 when using Park 400 Brushless Inrunner |
Needed to Complete
Needed to Complete
Brushless MotorBrushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
4 to 6-Ch Receiver
Li-Po Battery
Li-Po Charger
CA
Propeller