ElectroStick EP RxR

For many years the Stik design has been a staple at the flying field, and now ElectriFly has equipped it with clean, quiet electric power! Glow pilots considering an electric aircraft will find familiarity in the ElectroStik’s quality wood construction and traditional look. Modelers who enjoy the advantages of brushless motors have the opportunity to experience flying an R/C classic. And everyone will appreciate how easy it is to get to the flight line — especially with the Receiver-Ready (Rx-R) version!

  • It’s an entirely new take on the classic "Stik" design that has been a favorite among R/C pilots for years!
  • All flight surfaces are prehinged with control horns mounted to shorten assembly time and ensure perfect alignment.
  • Flight-ready after just one hour of simple assembly — with no gluing!
  • Rx-R version comes with a quality ElectriFly brushless power system and three ES80 micro servos — just add a receiver and battery.
  • Available as a Rx-R or an ARF!



main wing carbon fiber tube
The main wing slides onto this lightweight carbon fiber tube and bolts together with just four screws and two straps – no messy epoxy!

 

horizontal and vertical stabilizers
The horizontal and vertical stabilizers simply bolt together, without measuring or gluing.



ES80 micro servos
The included servos are quality ElectriFly ES80 micro servos, already installed so that all you have to do is plug in your receiver.*
*Receiver shown is not included.

RimFire 42-40-1000 outrunner brushless motor
The recommended RimFire 42-40-1000 outrunner brushless motor delivers plentiful, dependable power.



roomy interior
Access to the roomy interior is quick and easy, allowing for convenient battery changes.



thumb screws
The wing attaches quickly with these two EZ Bolt thumb screws – no tools required!



52.75" wingspan
With its 52.75" wingspan, the ElectroStik is ideally sized for both excellent performance and transportation ease.

 

parts layout
With its low number of parts and high amount of prefabrication, your ElectroStik requires only an hour of final assembly.




SPECIFICATIONS

GPMA1574/ARF; GPMA7500/Rx-R
Wingspan: 52.75 in (1340 mm)
Wing Area: 589 in² (38 dm²)
Weight: 3-3.5 lb (1360-1587 g)
Wing Loading: 11.7-13.6 oz/ft² (36-42 g/dm²)
Length: 45.5 in (1155 mm)
Both require: 4-channel radio, receiver, 11.1V 3200mAh LiPo battery, charger
ARF also requires: 3 micro servos, outrunner brushless motor, 45A brushless ESC









« Go Back

Powered By PieCMS