| Wingspan: | 55 in (1400mm) |
| Overall Length: | 57 in (1450mm) |
| Wing Area: | 505 sq in (3245 sq cm) |
| Flying Weight: | 3.25 lb (1.5 kg) |
| Motor Size: | BL 400 DF Outrunner 3500Kv (EFLM1320DF) (2 required) |
| Radio: | JR Sport S400 or SX600 |
| Servos: | four (4) E-flite S75 sub-micro servos (EFLRS75) and one JR SPORT ST47BB servo (JSP20060) |
| Trim Scheme Colors: | Prepainted |
| CG (center of gravity): | 5.5 in (140mm) back from the leading edge |
| Prop Size: | 66mm 3-bladed fan unit (2)(included) |
| Speed Control : | 20-amp Brushless (EFLA311B) (2 required) |
| Recommended Battery: | 2100 3-cell Li-Po (THP21003SPL) (2 required) |
| Flaps: | n/a |
| Retracts: | n/a |
| Approx. Flying Duration: | 9–10 minutes |
Needed to Complete
In order to fly, you will need:
Two E-flite 400DF motors (EFLM1320DF or EFLM1320DF2 for a 2-pack)
Two 3-cell 11.1V 2100mAh Li-Po battery packs (THP21003SPL)
4-channel FM radio system (JSP14000**)
Two 20A brushless ESCs (EFLA311B)
Four sub-micro servos (2 aileron, 1 rudder & 1 steering) (EFLRS75)
One standard servo (elevator) (JSP20060)
Three Y-harnesses (aileron, throttle and rudder/steering servos) (JSP98020)
Two 6-inch extension leads (may be needed for ESC's) (JSP98110)
Three 12-inch extension leads (aileron & steering servos) (JSP98030)